If you do not feel comfortable programming your alarm system, contact our administrative office. Our operators are more than happy to remotely change pass codes for you.
The Master Code
To program the Master Code, enter [*] [5] current [Master Code] [40] [new Master Code]. The Master Code must be four digits long, unless otherwise indicated by your installer. Enter digits 0 through 9 only.
Press [#] to return to the Ready state.
Additional Codes
Up to 32 additional access codes (01 through 32) may be programmed.
To program a new code:
Enter [*] [5] [Master Code] [code number 01 to 32] [new access code].
The code number is a double digit from 01 to 32. Access codes must be four digits unless otherwise indicated by your installer. Enter digits 0 through 9 only. Press [#] to return to the Ready state. If an access code already exists for the code number you have selected, it will be replaced by the new code. Be sure to record your new code(s) on the “System Information” page in this book.
To erase a code:
Enter [*] [5] [Master Code] [code number 01 to 32] [*]. Press [#] to return to the Ready state.
The Master code cannot be erased.
IMPORTANT: You must contact our administrative office during business hours and notify them of any changes you have made to the system. Our monitoring station requires that your new codes to be on file in order to cancel alarms.